Aurevo Sterling Silver Pendant Necklace

925 Sterling Silver Pendant Necklace Built for Repeat Wholesale Orders

This is a 925 sterling silver pendant necklace: a mirror-polished teardrop pendant with a cubic zirconia set at the bail, carried on a 45 cm fine link chain and closed with a spring-ring clasp. It is produced for jewelry retailers, boutiques, online jewelry brands and private label collections that need one silver pendant necklace specification they can order again, season after season.

The sections below are written for the buying decision: the full specification, the production and inspection stages behind the piece, the Aurevo factory facts that matter at sourcing stage, and the questions that come up most often before a first order. Where the standard specification leaves a value open, that is stated rather than filled in with a figure borrowed from another listing.

The Buying Risk: A Reorder That No Longer Matches the Approved Piece

In a repeated silver pendant program, the expensive failure is rarely a broken necklace. It is a necklace that is subtly different from the piece the buyer approved. On a design this clean, the value sits in four visible details: the teardrop silhouette, the mirror polish, the cubic zirconia seat at the bail, and how firmly the spring-ring clasp closes. If a later batch arrives with a hazier polish, a stone seated slightly off centre, or a clasp that opens with almost no resistance, the buyer usually finds out after the goods have landed and been counted in.

The cost is concrete: product photography no longer matches the stock in the box, the same SKU cannot be displayed at the same price beside the earlier batch, and a rework or replacement shipment costs several times the value of the affected pieces.

How the standard is held between production runs

This pendant necklace is produced in Aurevo's own jewelry production area, and the sequence below is the one applied to a repeat order:

• Specification locked before production. The pre-production sample takes 7-15 working days. Pendant dimensions, chain length, clasp type and finish are agreed at that point, and it is worth confirming in writing which physical piece will serve as the reference for the bulk run.
• Component checks before assembly. Chain, spring-ring clasp and cubic zirconia are inspected as components before the pendant is assembled, so a wrong link size or a loose stone seat is caught before it is built into a finished necklace.
• In-process checks at the two most visible operations. Stone setting and polishing are inspected while the work is still on the bench, because a stone seat or a polish deviation is much harder to judge once the piece is bagged and boxed.
• Final inspection before packing. This sterling silver pendant necklace goes through the same final inspection as every jewelry order, so the finish and the clasp are checked before the piece is packed.
• Packaging inspection. Finished pieces are checked again as they are placed into protective presentation boxes for international shipment.

What this system fixes is the process, not a promise of a fixed number of checks per piece. The 40+ figure describes the facility's inspection capacity, and the checks applied to your order follow the acceptance criteria you agree. If you reject a piece for a concrete reason - a visible polish line, a stone that is not centred, a clasp that needs an unexpectedly firm press - state it at sample stage so it is written into the approved standard instead of being discovered at retail.

Full Specification of the Sterling Silver Pendant Necklace

Material	925 sterling silver
Pendant	Polished teardrop with cubic zirconia set at the bail
Pendant dimensions	Confirmed at enquiry - send your target length x width in mm
Chain	Fine link chain
Chain width	Confirmed at enquiry - send your target width in mm
Chain length	45 cm
Clasp	Spring-ring clasp
Finish	Mirror-polished
Minimum order quantity	200 units for the standard specification
Sample lead time	7-15 working days
Production lead time	20-40 working days after order confirmation
Customization	OEM, ODM and private label
Packaging	Confirmed per order and stated on the proforma invoice
Quality inspection	40+ quality-control stations across the production process
Warranty	12 months from the date of delivery, covering manufacturing defects under normal use
After-sales	Warranty claims and after-sales requests handled through the Aurevo sales team

Pendant dimensions and chain width are the two values this item does not fix in the standard specification, so they are agreed with the buyer. Send your target pendant length and width in millimetres, plus your target chain width, with your enquiry: both are confirmed before the order is placed and then locked on the approved pre-production sample. Everything else in the table - 925 silver, mirror-polished teardrop with the cubic zirconia at the bail, fine link chain, 45 cm length, spring-ring clasp, 200-unit MOQ, 7-15 day sample and 20-40 day production - is the standard value for this item.

Why This Pendant Earns Its Place in a Jewelry Assortment

• One silhouette, one SKU to manage. A single polished teardrop carries no seasonal styling, so the same item can stay in your catalog across seasons and be reordered without re-photographing or repricing the range.
• A deliberate point of light. The cubic zirconia sits at the bail rather than in a cluster, so the pendant keeps one small highlight that reads clearly in a plain-background product photo and on a display stand. Appearance is described as observed in the specification; no claim is made here about brilliance, wear life or resistance.
• 45 cm chain length. This places the pendant at the collar, the length that combines most easily with a standard retail neckline. If your assortment runs on longer chains or chokers instead, treat the length as a confirmation point at enquiry stage rather than a change made after the goods ship.
• Spring-ring clasp. A low-profile closure that keeps the back of the necklace tidy on a fine chain. A market that expects a lobster clasp should flag it as a customization point before the order.
• Sterling silver as the stated material. The pendant and chain are specified as 925 sterling silver with a mirror-polished finish, which is the material declaration a fine-jewelry counter buyer needs in writing.
• An MOQ that supports a test order. 200 units is the minimum for the standard specification, so a buyer can run a first order, read sell-through, and reorder the same item instead of rebuilding the specification each season.

Quality Control: What Is Checked Before the Necklace Is Packed

Quality control is carried out at different stages of production rather than being saved for the end. More than 40 quality-control stations are distributed from incoming material inspection through to final inspection; that count is facility-wide and covers watch and jewelry production. For this silver pendant necklace, the working sequence is:

Incoming material	925 silver stock checked before it is formed into a pendant
Components	Fine link chain, spring-ring clasp and cubic zirconia checked before assembly
In process: stone setting	Stone seat position and grip checked while the piece is still on the bench
In process: polishing	Mirror finish checked for uniformity across the pendant face and edges
Assembly	Pendant-to-chain joint and spring-ring clasp function checked on the assembled necklace
Appearance and final	Specification match, finish and quantity checked before the piece can be packed
Packaging	Piece and presentation box checked again as the order is packed for shipment

How many checks an individual order receives follows the inspection plan agreed for that order. Buyers who work to a formal acceptance standard - a polish grade, a clasp force, a stone-setting tolerance - should describe it with the enquiry, so that the approved sample and the final inspection of the bulk order use the same reference.

Production Process, Step by Step

1. Specification and sample. Your dimensions, chain length, clasp and packaging requirements are fixed, and a pre-production sample is produced in 7-15 working days.
2. Pendant forming. The teardrop pendant body is produced in the jewelry production area, which covers casting, CNC processing, stone setting, polishing, plating, engraving and final finishing operations.
3. Stone setting. The cubic zirconia is set at the bail, where the pendant meets the chain.
4. Polishing. The pendant and chain are mirror-polished, the finish the specification calls for.
5. Assembly. Pendant and chain are joined and the spring-ring clasp is fitted, then inspected as an assembled piece.
6. Final inspection and packing. Appearance and final inspection follow, then packaging inspection as the necklace goes into its protective presentation box.

Standard production runs 20-40 working days after order confirmation. The 175,000+ jewelry pieces per month and the 16 production lines are facility-wide figures covering watch and jewelry production together, so the share available to a specific necklace program is confirmed against your order schedule. That shared capacity is also why a jewelry reorder can be planned alongside a mixed watch and jewelry shipment.

Manufacturer Profile: Aurevo

Aurevo is a Shenzhen-based manufacturer of watches and jewelry and has supplied wholesale, OEM, ODM and private label production to international businesses since 2012. The capacity figures below are company-level and cover the whole facility, which produces watches and jewelry on the same lines; they are not an allocation reserved for this necklace. The facts that matter at sourcing stage are:

• Founded 2012 in Shenzhen, China; the facility now covers more than 18,000 square meters with areas for product development, assembly, jewelry production, quality control, packaging and warehousing.
• 220+ employees and 16 production lines.
• Capacity of 4.5M+ pieces per year, including 200,000+ watches per month and 175,000+ jewelry pieces per month.
• 8,000+ existing watch and jewelry styles available as a starting point, alongside developed-from-scratch projects.
• Buyers served in 65+ markets, across four channel types: retailers, distributors, importers, and brand owners running e-commerce or private label programs.
• OEM, ODM and private label production from your drawings, samples or specifications, or developed from a product idea and presented as a sample before production.
• Export support: export documentation and certificate of origin are prepared for orders, shipment terms including FOB arrangements are confirmed per order, and orders are tracked from production to dispatch.
• 12-month warranty on every Aurevo watch and jewelry piece from the date of delivery, covering manufacturing defects under normal use; warranty claims and after-sales requests are handled by the sales team.

These are company and factory facts. They describe the manufacturer behind the necklace rather than a certification of this specific item; the specifications that apply to this product are the ones in the table above.

Private Label, OEM and ODM Options for This Necklace

The necklace can be supplied under your own brand. The customization points buyers confirm most often are pendant dimensions, chain length, chain width, clasp type, finish, engraving, logo application and packaging, including branded presentation boxes. To move quickly, send the following with your enquiry:

• Target pendant length and width in millimetres, plus target chain length and width.
• Clasp preference and the market the piece is going to.
• Logo or engraving artwork, and where it should appear.
• Packaging requirement: presentation box, pouch, labeling, hangtags.
• Order quantity, target launch date and destination market.

The standard minimum order quantity is 200 units. Where a requirement moves away from the standard specification - a different pendant dimension, a different clasp, custom packaging - quantity and terms are quoted for that project, so it is faster to state the full requirement in one enquiry than to confirm it item by item.

Ordering, Packaging and Shipping

• Ordering: MOQ 200 units for the standard specification; sample in 7-15 working days; production in 20-40 working days after order confirmation.
• Packaging: the standard form is one necklace in a protective presentation box, with the boxes then packed into export cartons for international shipment. Carton quantity, carton dimensions and gross weight are confirmed for the order so that freight can be quoted accurately, and order-specific packaging and labeling are stated on the proforma invoice.
• Shipping: export documentation and certificate of origin are prepared for orders, and shipment terms - including FOB arrangements - are confirmed for your order.
• Payment: payment terms are not published on this page. Tell the sales team the terms your company works with when you request pricing, so the terms and the proforma invoice can be confirmed for your order.

Buyer FAQ

Request the Wholesale Price for This Pendant Necklace

To prepare a quotation for this sterling silver pendant necklace, send the target pendant dimensions, chain length and width, clasp preference, order quantity, logo and packaging requirements, and your destination market. Those details are what the sales team needs to confirm the specification and price the order.